FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.62.0.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- No improvements were introduced in this release.
Fixes
- Purchasing
- Fixed an issue where a Rejected Purchase Order could not be cancelled.
- Work Order Scheduling
- Fixed an issue where Manual Activation did not decrement remaining occurrences.
- Asset Management
- Fixed an issue where removing a Meter Reading Definition from an Asset resulted in an Operation Failed error.
- Work Order Management
- Fixed an issue where deleted Labor Resources remained visible on the View All Work Orders grid.
- Fixed an issue where Active Labor Resources did not accurately reflect Work Orders with open Labor Logs.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.61.1.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Service Request Management
- Improved validation handling so Requester Name, Requester Email, and Requester Phone Number reflect configured required settings.
- Improved Service Request Administrator permissions to allow updates when a phone number is not required.
- Improved attachment handling to ensure removed files prior to submission are not retained on submitted Service Requests.
Fixes
- Work Order Management
- Fixed an issue where certain Work Orders could not be closed.
- Fixed an issue where clicking through a Recurring Work Order or its activated Work Orders caused a parameter mismatch error.
- Asset Management
- Fixed an issue where not all Assets were displayed in Show All Assets.
- Facilities & Tools
- Fixed an issue where editing a Facilities record did not retain the associated Customer.
- Fixed an issue where editing a Tool record did not retain the associated Labor Resource.
- Inventory & Transactions
- Fixed an issue where a Deallocate Transaction could be completed with a quantity of 0.
- Fixed an issue where a Receive Transaction could be completed with a quantity of 0.
- Reporting & Dashboards
- Fixed an issue where the Repeat Repair Widget did not display associated Work Order Numbers.
- Fixed an issue where the Repeat Repair Widget included incorrect Asset and Maintenance Category pairings.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.7.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Asset Downtime
- Improved Estimated vs. Actual Downtime widget to consistently display Estimated Downtime as a sum of Hours regardless of entry unit.
- Improved Asset Downtime Listing to correctly display the Unit of Measure associated with Actual Downtime rather than Estimated Downtime.
Fixes
- Inventory Management
- Fixed an issue where a “Shelf does not exist at the specified location” error occurred when creating a transaction to a nested bin location.
- Fixed an issue where Inventory Item Quantity On Hand could not be edited.
- Fixed an issue where no Location record was created when creating a new Inventory Item for a Building/Location/Property.
- Fixed an issue where Adjustment Transaction Total Cost could contain fractional cents.
- Invoicing
- Fixed an issue where selecting an existing Invoice Item did not populate Unit of Measure and Unit Price when creating an Invoice Line Item.
- Work Order Scheduling
- Fixed an issue where a reactivated Recurring Work Order failed to activate new Work Orders.
- Fixed an issue where activating a Work Order from a Recurring Work Order with a single attachment created duplicate attachment links or included incorrect attachments across iterations.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.61.0.0.
What’s New
What’s Improved
- Reports & Dashboards
- Improved Repeat Repair Widget to include export options.
- Improved Preventive Maintenance Forecast Widget to ensure results align with selected customer date range filters.
Fixes
- Work Order Management
- Fixed an issue where Closed Work Order Cost and Asset Cost History displayed different totals for the same month.
- Fixed an issue where Active Work Orders did not display an Issue Date value.
- Fixed an issue where editing or removing a Note caused all associated attachments to be removed.
- Fixed an issue where built-in Work Order Priority values, when renamed, did not display correctly in Recurring Work Order Details if assigned prior to renaming.
- Service Request Management
- Fixed an issue where the embedded View All Service Requests grid did not display associated Work Orders.
- Fixed an issue where the “Create Service Requests As a Guest” option failed on the Web Portal login screen.
- Fixed an issue where isolated pending Service Requests returned an Operation Failed error when attempting status changes or updates.
- Work Order Scheduling
- Fixed an issue where Recurring Work Order Runtime Schedules failed to activate Work Orders.
- Fixed an issue where selecting Activate Now did not update the Next Activation value when the Runtime Schedule had no Meter Readings.
- Inventory Management
- Fixed an issue where the value entered into the Reorder Point field was not retained in the Inventory Item record.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.6.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Service Request Management
- Improved Location grid behavior in the SR Standalone app to properly nest Locations consistent with the FTMS web application.
- Improved Service Request Administrator permissions to allow updates when a phone number is not required.
- Improved SR submission handling to prevent the form from becoming unresponsive when descriptions exceed character limits.
- Improved consistency of edit options when modifying a Service Request in SASR.
- Improved guest redirect behavior when creating a Service Request from the Web Portal to ensure proper login routing.
- Work Order Management
- Improved retention of Assigned To values on Work Order Tasks during save operations.
- Improved accuracy of Assigned Tasks displayed on the Work Order Labor tab.
- Improved handling of Work Order part cost calculations when closing a Work Order with associated parts.
- Improved stability of Add & Pull Tracked Parts operation.
Improved handling of Draft Work Orders to properly control part consumption.
- Inventory & Transactions
- Improved Part Restock Transactions from Work Orders to correctly use the Cost Center of the paired Pull Transaction.
- Improved Total Cost precision handling in Receive Transactions when values exceed four decimals.
- Improved accessibility of Transaction Number for New Inventory Transactions.
- Invoicing
- Improved validation to allow use of the % character in Invoice Payment Term Name.
- Improved Tax Name management to allow editing without requiring deletion and recreation.
- Improved error messaging clarity for Invoice Payment reversals.
- Locations
- Improved creation of Locations to prevent internal server errors.
- Improved consistency of Indoor Location “Located In” value assignment to parent Locations.
- Filtering & Grid Behavior
- Improved User Location filtering behavior for Service Request listings.
- Improved Assets grid column filtering for blank values.
- Improved Buildings tab column filtering within the Assets grid.
- Improved grid sorting retention when “Retain grid searches” and “Retain grid column filters” are enabled.
Fixes
- Work Order Management
- Fixed an issue where Work Orders could lose the Assigned To value on Task save.
- Fixed an issue where closing a Work Order with associated parts could zero out the Work Order’s part cost field.
- Fixed an issue preventing completion of Add & Pull Tracked Parts operations.
- Service Request Management
- Fixed an issue where User Location filtering failed to properly filter Service Request listings.
- Locations
- Fixed an issue where creating a Location resulted in an internal server error.
- Inventory & Transactions
- Fixed an issue where Part Restock Transactions did not use the Cost Center from the paired Pull Transaction.
- Fixed an issue where Total Cost was truncated in Receive Transactions exceeding four decimal places.
- Invoicing
- Fixed an issue where Invoice Payment reversals returned a confusing Operation Failed error.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.5.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Asset Downtime
- Improved Estimated Downtime validation to require selection of a unit before allowing entry or updates.
- Improved Estimated Downtime validation to prevent negative values from being entered or updated.
Fixes
- Service Request Management
- Fixed an issue where the Associated Work Order Number did not display in the Service Request grid under the Work Order Numbers column.
- Fixed an issue where Custom Priority values were not displayed on the Service Request Details page.
- Inventory
- Fixed an issue where the “Allow Usage in Invoices” Sales Tax checkbox did not retain its checked state after saving.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.4.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Inventory
- Improved Receiving Record validation to display a warning when a received quantity exceeds the ordered quantity.
- Work Order Management
- Improved performance of the New Master Work Order page to reduce load times.
- Improved performance of the Create Work Order process to reduce excessive load times.
- Improved the Work Order Home page layout to prevent the “View All Work Orders” dropdown from being cut off.
- Improved alignment of the “Reactivate” button text when reactivating a closed Work Order.
- Improved confirmation message placement when the Assigned To Me tab is selected.
- Maintenance Categories
- Improved the View All Maintenance Categories grid to enable column sorting functionality.
- Global Filters & Widgets
- Improved Global Filter behavior to prevent unintended clearing of individual date filters when no Global Date Filter is selected.
- Improved widget date filtering so users can clear or reselect dates after applying a specific date range.
- Improved Reset Global Filter behavior to preserve individual date filters where appropriate.
- UI & Usability
- Improved layout on the Add New Location dialog to prevent overlapping fields.
- Improved labeling of the “Remember Me” checkbox on the login page to display proper spacing.
- Corrected Time Zone display from “DayLight” to “Daylight.”
Fixes
- Service Request Management
- Fixed an issue where the Service Request form was missing Location Type in the Location grid.
- Purchasing
- Fixed an issue where address fields on the Edit Vendor dialog (Create Purchase Order Item page) did not allow commonly used special characters including #, @, /, :, and .
- Work Order Management
- Fixed an issue where Draft Work Orders appeared in the All Open Work Orders list.
- Fixed an issue where the Closed Work Orders This Week list on the Work Order Home page included Work Orders not closed within the last week.
- Fixed an issue where users could not navigate to a list of Past Due Work Orders using the provided buttons or “See More” link.
- Fixed an issue where the Work Order Type field in a Recurring Work Order displayed as a disabled (grayed-out) dropdown.
- Fixed an issue where the Completed By field did not populate with the name of the user who completed the Work Order.
- Fixed an issue where deleting a Location removed it from the system but left orphaned references on associated Work Orders, preventing updates or closure.
Fixed an issue where Abandoned Recurring Work Orders were incorrectly saved as Active Work Orders.
- Fixed an issue where the Meter Reading column was missing from the Closed Work Orders grid.
- Fixed an issue where the Search for Work Order by number field on the Home page incorrectly displayed as a dropdown.
- Fixed an issue where renaming the High Priority label prevented High Priority Work Orders from displaying correctly on the Home page.
- Asset Downtime
- Fixed an issue where adding Downtime to a Work Order Asset resulted in an Operation Failed error.
- Fixed an issue where Downtime records did not display on Work Order Assets due to a console error.
- Maintenance Categories
- Fixed an issue where the Edit icon for Maintenance Categories was not functioning.
- Fixed an issue where dropdown menus for Maintenance Category, Lead’s Name, and Cost Center did not function correctly in Create or Edit Recurring Work Order.
- Reporting & Printing
- Fixed formatting issues where columns were cut off when printing the following dashboard reports:
- Open Work Orders List (Due Date column)
- Open Service Requests
- Preventative Maintenance Work Order Status by Due Date
- Unassigned Open Work Orders
- Inventory Cost History
- Closed Work Orders Breakdown by Labor Resource
- Customer Cost History
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.3.0.
What’s New
- Service Request Management
- Added the ability to print a Standalone Service Request
What’s Improved
- Inventory
- Improved the Receiving Record close prompt to ensure additional actions are displayed correctly instead of being bypassed.
- Purchasing & Receiving
- Improved validation logic on Purchase Order Shipping fields to allow commonly used special characters.
- Improved Vendor address field validation to allow commonly used special characters.
- Improved PO Issuer address field validation to allow commonly used special characters.
- Improved Vendor dialog address field validation to allow commonly used special characters (including #, @, and /) on:
- Purchase Order page
- Packing Slip page
- Vendor Invoice page
- Service Request Management
- Improved printing of the Asset list in Service Requests so Asset Types display correctly in Standalone Service Request (SASR) printouts.
- Improved Asset list display in Service Requests (SASR) to correctly show Asset Types.
Fixes
- Purchasing & Receiving
- Fixed an issue where Auto-Close of a Purchase Order did not allow users to take additional actions.
- Fixed an issue where a Receiving Record allowed the same item to be added multiple times.
- Work Order Management
- Fixed an issue where updating Estimated Hours on a Work Order Task incorrectly updated the Estimated Hours of the associated Task record.
- Fixed an issue where the Closed Work Orders This Week grid could display Work Orders older than one week.
- Fixed an issue where the Priority column on the Work Orders page failed to filter blank values correctly.
- Fixed an issue where the All Work Orders grid failed to filter records with blank values correctly.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.2.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Service Request Management
- Improved the Service Request record UI for better usability and clarity.
- Purchasing and Receiving
- Improved stability and usability of the Purchase Order Attachments grid.
- Improved the Receiving Records grid by removing redundant columns.
- Improved Purchase Order attachment handling to ensure attachment descriptions are saved correctly during PO creation.
- Inventory Management
- Improved performance of the Stockroom Structure List, reducing excessive load time
- Task List
- Improved Task List Excel export/printing behavior so required results print correctly from generated .xlsx files.
- Work Order Management
- Improved display formatting when editing Parts on a Work Order so Total Cost is shown as currency.
- Improved confirmation messaging when updating a Recurring Work Order Series to be clearer and less confusing.
- Access & Security (Usability)
- Improved location visibility behavior to reduce cases where administrators must add nested locations for users to see relevant locations.
Fixes
- Work Order Management
- Fixed an issue where Assign Task → Labor Resource could fail with an Operation Failed error when the labor resource was already associated with the labor craft.
- Fixed an issue where the View All Work Orders page could remain stuck on “Data is Loading.”
- Fixed an issue where searching within specific columns could fail to find matches in:
- the Work Orders grid
- the Deleted Work Orders grid
- Fixed an issue where Work Order History search could fail.
- Fixed an issue where the Active Work Orders grid sort did not correctly sort the grid data.
- Fixed an issue where closing a Work Order and selecting Go Back from the closed Work Order view could result in an error.
- Fixed an issue where the Go Back behavior while entering a Recurring Work Order could incorrectly return the user to the scheduling page.
- Work Order Scheduling
- Fixed a spelling issue where “Occurrences” was misspelled (Occurences) in the New Runtime Schedule dialog.
- Fixed an issue where Next Activation Date & Time could display for a calendar-based schedule that is set to end today (end-of-schedule handling).
- Asset Downtime
- Fixed an issue where editing downtime for equipment could error in cases where the associated Work Order contained spacing/formatting anomalies.
- Meter Readings
- Fixed an issue where the Meter Readings grid was missing the Value column.
- Fixed spelling issues for Unit of Measure values in Meter Reading Definitions.
- API / Back-End
- Fixed an issue where the WorkOrder.GetAllTools endpoint did not return the TotalCostAfterMarkup value.
- Maintenance Categories
- Fixed an issue where Maintenance Categories could not be deleted regardless of association status.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.1.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Asset Map
- Improved handling of ZIP codes to ensure a broader range of valid postal codes are accepted.
Improved responsiveness of the Asset Map when users with limited permissions interact with Service Request actions.
- Improved asset selection behavior when building routes, even when zooming out to select additional assets.
- Improved display of asset details on the Asset Map by showing blank values instead of null descriptions.
Improved support for viewing multiple assets associated with the same address.
- Purchasing
- Improved Purchase Order line item creation from existing assets to correctly carry over the Unit of Measure.
- Notifications
- Improved Work Order review notifications to correctly include associated Work Order notes.
- Improved Work Order review notifications to correctly include Task names.
Fixes
- Security & Access Control
- Fixed an issue where the Google Maps API key was exposed on the Get All Registered Apps page.
- Fixed an issue where the Google Maps API key was exposed on the Update External Apps page.
- Fixed an issue where user passwords could be visible to other users.
- Fixed an issue where underprivileged users could create Work Orders from the Asset Map.
- Navigation & UI
- Fixed the View Details hyperlink for assets of type Part.
- Fixed the View Details hyperlink for assets of type Tool.
- Fixed incorrect display of user First Name and Last Name values.
- Fixed a typo on the Update Registered Apps page.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.60.0.0.
What’s New
- Dashboard
- Task Frequency per Asset Widget
- Added a Task Frequency per Asset widget that provides clear visibility into how often tasks are performed on each asset.
- Allows maintenance teams to quickly identify assets that require frequent attention, helping surface potential reliability or performance issues.
- Supports better preventive maintenance planning by highlighting assets with unusually high task activity.
- Enables supervisors and planners to prioritize maintenance efforts based on actual task frequency trends.
- Service Request Management
- QR Code–Initiated Service Requests
- Added the ability to scan a QR code to open a Service Request form that is automatically associated with the applicable asset.
- Reduces manual data entry by pre-filling asset information when a request is created.
- Enables faster and more accurate Service Request submission from the shop floor, equipment location, or field.
- Improves request accuracy by ensuring Service Requests are consistently linked to the correct asset.
What’s Improved
- Asset Management
- Improved reliability and handling when deleting Assets, ensuring associated data is processed correctly.
- Purchasing
- Improved the Credit Memo process for greater accuracy and consistency.
- Reporting
- Improved printing of closed Work Order reports for clearer, more reliable output.
- Service Request Management
- Improved notifications for submitted Service Requests and Work Orders created from Service Requests.
- General stability improvements and minor fixes across Service Request Management functionality.
Fixes
- Service Request Management
- Fixed an issue where a request could not be completed due to an error when attempting to view, close, or delete a Work Order created from a Guest Service Request with no description.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.59.3.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Dashboard
- Improved widget loading behavior so Select Widgets no longer appears blank after a timed logout.
- Improved column resizing behavior within dashboard widget tables, allowing users to resize any selected column.
- Inventory Management
- Improved removal of Child Inventory Item associations from Parent Inventory Groups, preventing operation failures.
- Improved Receiving behavior to ensure Total Cost updates correctly when Unit Cost is modified.
- Improved Receiving workflows by preventing unintended edits to Unit of Measure on Receiving Records.
- Purchasing
- Improved labeling on New Credit Memo creation so the Amount field is displayed correctly.
- Improved display of zip codes in the Address column on the All Invoice Issuers grid.
- Reporting
- Improved Excel export functionality to prevent XML errors when opening exported files.
- Improved Work Order report printing from the View All Work Orders grid to ensure usable output.
- Service Request Management
- Improved configuration behavior on the Service Request Configuration page when setting required and visibility options for the Service Request Description field.
- General
- Improved tooltip behavior so tooltips no longer remain stuck on the screen.
Fixes
- Location & Mapping
- Fixed an issue where incorrect GPS location data could be displayed.
- Meter Readings
- Fixed an issue where creating a new Meter Reading Definition could default to the name of an existing definition.
- Fixed an issue where searching within the Unit field for Meter Reading Definitions returned empty results.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.59.2.0.
What’s New
-
- No new features were introduced in this release.
What’s Improved
- Inventory Management
- Improved validation and handling when updating Parent Inventory Groups, ensuring child group associations and related inventory items are preserved correctly.
- Improved stability when removing Parent Inventory Group associations from Child Inventory Groups.
- Improved Receiving workflows so the Received By field consistently displays a dropdown list of valid user full names.
- Improved consistency of the Received By value to prevent unintended changes after selection.
- Purchasing
- Improved reliability when creating new Purchase Order Line Items, ensuring items are saved correctly.
- Improved Invoice calculations so Subtotal and Total values update and display correctly as line items are added.
- Improved the Issue Credit Memo process to reliably retain selected line items when creating credit memos.
- Improved retrieval of existing asset details during Purchase Order creation to prevent errors.
Fixes
- Asset Management
- Fixed an issue where creating a Building, Facility, or Property could fail with an operation error.
- Inventory Management
-
- Fixed permission enforcement issues where underprivileged users could create or delete Inventory Items for Asset Types they did not have permission to manage.
- Fixed an issue where updating a Parent Inventory Group could unintentionally remove Child Inventory Group associations.
- Fixed an issue that caused an Operation Failed error when removing Parent Inventory Group associations from Child Inventory Groups.
- User Interface
-
- Fixed an issue on the View All Equipment page where columns could not be resized.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.59.1.0.
What’s New
- No new features were introduced in this release.
What’s Improved
- Inventory
- Improved functionality and reliability of Quantity on Hand, Stockrooms and Storage Locations, and Inventory Items, resulting in more accurate inventory data and smoother workflows.
- Purchasing
- Minor usability improvements and defect fixes across Purchasing workflows.
- Reporting
- Minor stability improvements and defect fixes to Reporting functionality.
- Service Request Management
- Minor usability improvements and defect fixes across Service Request Management.
- Work Order Management
- Improved performance and loading behavior of the Past Due grid on the Work Order Home page.
- User Management
- Minor usability improvements and defect fixes across User Management functionality.
Fixes
- General defect fixes are included as part of the improvements listed above.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.59.0.0.
What’s New
- Dashboard
- Added a new Parts Cost Breakdown by Asset widget that provides clear visibility into which assets are driving parts costs. This widget helps teams quickly identify high-cost assets, track parts spending trends over time, and make more informed maintenance and replacement decisions.
What’s Improved
- Asset Management
- General stability improvements and minor defect fixes across Asset Management functionality.
- Dashboard
- Improved Excel export when downloading widget data.
- Improved column sizing in Excel exports for better readability.
- Additional minor fixes and usability improvements across the Dashboard.
- Inventory Management
- General stability improvements and minor defect fixes across Inventory Management functionality.
- Service Request Management
- General stability improvements and minor defect fixes across Service Request Management functionality.
Fixes
- No standalone fixes were introduced beyond the improvements listed above.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.58.0.0.
What’s New
- Dashboard
- Added a Work Order Count to the PM Forecast widget, providing clearer visibility into upcoming preventive maintenance workload.
What’s Improved
- Asset Management
- Improved Asset Downtime tracking to ensure downtime history remains accurate when an asset is deleted and later restored.
- General stability improvements and minor fixes across Asset Management functionality.
- Work Order Management
- Improved Work Order activation behavior when updating the Advance By date on schedules.
- General stability improvements and minor fixes across Work Order Management functionality.
Fixes
- No standalone fixes were introduced in this release beyond the improvements listed above.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.57.0.0.
What’s New
- Asset Management
- Added the ability to view and restore deleted assets, allowing users to recover assets that were removed in error.
- Dashboard
- Added a new Asset Downtime Listing widget providing quick visibility into assets that are currently down or have experienced recent downtime.
What’s Improved
- Asset Management
- Improved building structure integrity by preventing Floor records from being shared across multiple buildings.
- Improved Batch Restore behavior for non-maintainable assets.
- Improved the Asset Downtime tab to display more than three records per page.
- Improved warning messages when deleting an Asset that is associated with Work Orders, Service Requests, or Purchase Orders, making the impact clearer before deletion.
- General stability improvements and minor fixes across Asset Management.
- Inventory Management
- Improved usability and structure of the Stockroom Structure tab.
- Purchasing
- Improved Tax Entity creation by requiring the Tax Rate field to be populated.
- Improved Receiving workflows by making Purchase Order Line Items uneditable during receiving.
- Work Order Management
- Improved handling of Tasks on Recurring Work Orders.
- Improved saving of Work Orders that include Task Labor Resources.
- Improved creation of Tasks directly from the Work Order Tasks grid.
- Improved usability and performance of the View All Tasks page grid.
- Improved visibility of Active Work Orders on the Work Order homepage.
- Improved deletion behavior for Maintenance Categories associated with Work Orders.
- Improved display of Work Order components within Work Order History.
- Improved display of Location information within Work Orders.
- Work Order Scheduling
- Improved the ability to set Advance By values on calendar-based schedules.
Fixes
- No standalone fixes were introduced in this release beyond the improvements listed above.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.56.0.0.
What’s New
- Dashboard Enhancements
- Added a dashboard widget displaying Open Work Orders grouped by Customer.
- Asset and Inventory Synchronization
- Added the ability to keep Asset and Inventory Item names and numbers synchronized.
What’s Improved
- Restore Operations
- Improved restoring of multiple Buildings and multiple Assets.
- Reporting
- Improved PDF generation from Inventory Consumption and Inventory Items widgets.
- Inventory Receiving
- Improved Location search when receiving inventory items.
- Improved linking between Inventory Items and Assets when item numbers include special characters.
- Purchasing
- Improved appearance and workflow of Purchase Orders related to Vendor Invoice screen.
- Improved adding Addresses to existing Purchase Order Issuers.
- Work Orders
- Improved closing behavior for Activated Work Orders.
- Improved formatting and display of Work Order Descriptions.
Fixes
- General Stability
- Minor fixes and stability improvements across Dashboard, Inventory, and Service Requests.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.55.4.0.
What’s New
- Dashboard Widgets
- Improved sorting of the Open Work Orders Breakdown by Customer widget using Issue Date.
What’s Improved
- Purchasing
- Improved editing of Receiving Records created from Packing Slips.
- Improved deletion of Vendor Records when Vendor Numbers include spaces.
- Service Requests
- Improved display and behavior of the Completed Service Requests This Week grid.
- Work Orders
- Improved saving and closing behavior of Work Orders that include completed tasks.
- Improved display of Location data within Work Orders.
- Labor Resources
- Improved retention of filters and searches in Labor Resource views.
Fixes
- General Stability
- Minor fixes and stability improvements across Purchasing, Reporting, and Service Requests.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.55.3.0.
What’s New
- Preventive Maintenance Reporting
- Added a dashboard widget comparing completed Preventive Maintenance Work Orders to scheduled Preventive Maintenance Work Orders by month.
What’s Improved
- Inventory and Service Requests
- Improved the Barcode button behavior on the Inventory Detail View.
- Improved stability of the Inventory Items list on the dashboard.
- Improved clarity of Service Request descriptions on the Service Request homepage.
- Work Order Scheduling
- Improved manual activation of Work Orders from the Work Order Schedule.
- Improved editing and deletion behavior for Work Order schedules.
Fixes
- Scheduling Reliability
- Minor fixes to improve reliability and consistency of Work Order Scheduling.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v4.55.0.0.
What’s New
- Work Order Visibility
- Improved visibility of Active and Blocked Work Orders on the Work Order homepage.
- Asset Downtime Scheduling
- Enhanced Asset Downtime scheduling directly from Work Orders to better align downtime records with Work Order execution.
What’s Improved
- Task List Printing and Usability
- Improved Task List printing to ensure consistent formatting, spacing, and content visibility across printed outputs.
- General stability and usability improvements to the Task List, reducing display issues during navigation and interaction.
- Dashboard and Reporting
- Improved the Downtime Breakdown by Asset widget for clearer insight into asset downtime.
- Grid Layout Retention
- Improved retention of column width and column order across All Assets, Show All Deleted Assets, and Meter Readings.
- Notifications
- Improved email notifications to clearly display Work Order Description and Priority.
- Scheduling and Purchasing
- Improved editing of Recurring Work Order schedules.
- Stability and usability improvements to the Global Schedule.
- Improved handling when removing assets from Purchase Orders across all states.
Fixes
- Work Orders and Assets
- Fixed an issue that could prevent removing Parts from closed Work Orders.
- Fixed an issue where Assets associated with deleted Recurring Work Orders could not be removed correctly.
- Resolved an issue that could result in duplicate Recurring Work Orders.
FasTrak SoftWorks, Inc. is pleased to announce the release of FTMaintenance Select v.3.76.3.0, which incorporates the following:
Solutions
- Work Order Management
- Minor defect fixes and improvements to Work Order functionality.
Recent Comments